Trash disposals are requirements in most homes today as they assist in the disposal and control of wastes which should not be mixed with other waste products in the sinks. However, like any appliance, they can be in a state of malfunctioning that suggests they need fixing. However, there are certain things that you would want to try before seeking the help of a professional in times of a problem.
Step 1: Safety First
Safety always comes first; the following guidelines should be taken into consideration before attempting any repair. Make sure that the switch for the garbage disposal is later off as a way of being certain that it does not operate when the drain is not being adjusted. Many people prefer to use it in their offices or home, so you have to ensure it has been disconnected from the power source to prevent boot-up when you are fixing it.
Step 2: Define the issue
The first thing anyone who wants to fix their garbage disposal should first figure out is what could be wrong with it. Some of the common issues are the lack of power to turn the disposal on, the disposal making loud noises or very bad grinding. Look for any vibrations, any abnormal sounds that signify that the motor is stuck, the flywheel is stuck, or that the materials are stuck to the roll.
Step 3: Clearing a Jam
You only get a feeling that there is a jam then you will be required to tread the blades in the same direction to remove what is blocking them. Many disposals also provide some sort of plier or tool that is used specifically for this purpose. Place the wrench in a hole that is found at the bottom of the disposal unit and move it around anticlockwise and clockwise and once you hear that the obstruction has come out, stop immediately.
Step 4: Reset and Troubleshoot
After you have detracted any protrusions and also searched for any other problem in the unit, switch off the unit and then press the reset button which is located at the lower part of the unit usually. This can often help to rectify such a situation and bring back the power and operation of the disposal.
When you are done, make sure to restore the power back switch then switch on the disposal to check whether it is working properly or not. If your disposal is still makes some squeaking noise or not working properly even after the above steps then you should contact a professional garbage disposal repair service.
Conclusion: Required professional help
Most garbage disposal problems are best solved by using certain simple techniques; there are however some cases where the services of a professional are necessary. If you have done the steps to the best of your ability and the disposal is not working as it should, then you may need professional help. They are uniquely suited to provide a comprehensive evaluation of the state and deal with more intricate issues without the risk of harm.
